Foam is a problem in textile aqueous printing, mainly in high speed printing of large blotches. Foam can cause un-level prints, “fish-eye”, bubbles and stripes on printed areas.
Similar problems may occur in aqueous coating processes.
AVCO-ANTIFOAM PR can solve such problems by preventing foam appearance in the printing or coating pastes during production and during processing.
AVCO-ANTIFOAM PR is suitable for all aqueous and for “oil-in-water” emulsions.SPECIFICATION:
Appearance |
Milky white, slightly viscous paste. |
Chemical nature |
Aqueous emulsion of silicone polymer. |
Compatibility |
Stable to all chemicals normally encountered in textile aqueous printing. |
Ionicity |
Nonionic/anionic |
pH (10% sol.) |
7.5 ± 1 |
Solubility |
Dispersible in water |
Storage |
Sensitive to frost. Do not store in direct sun. When properly stored stable for at least 12 months. |
APPLICATION:
To achieve best efficiency of anti-foaming effect, AVCO-ANTIFOAM PR should be added to the water phase, before adding all other ingredients of the paste.
Usage level can be determined by trials, and should be 0.2-2 g/kg.
|