AVCOSOFT PE is a nonionic Polyethylene emulsion. It is an excellent resin plasticizer, fibre lubricant and softener, and adds drape to fabrics treated with thermosetting resins (Glyoxal, UF, Melamine and PVA resins).
SPECIFICATION:
Appearance |
Slightly beige opalescent liquid. |
Chemical nature |
Polyethylene emulsion. |
Compatibility |
Good with chemicals used in resin finishing. |
Ionicity |
Nonionic. |
pH (as is) |
9.0 ± 0.5 |
Solubility |
Can be mixed with water at any ratio. |
Storage |
Sensitive to frost. Store in closed drums. When properly stored, stable for at least 12 months. |
PROPERTIES & USES:
- In wash and wear resin finishing, AVCOSOFT PE improves abrasion resistance,
improves
sew-ability and lower the reduction of fabric strength while using resin
finishing
agents.
- AVCOSOFT PE possesses good durability against repeated washing.
- No adverse effects on rubbing and light fastness of dyed and printed fabrics.
- AVCOSOFT PE is recommended for finishing cotton, viscose, polyester, polyamide,
polyester-cotton and other blends, for all kinds of wash and wear, permanent-
press
and dimensional stability finish of fabrics.
APPLICATION:
AVCOSOFT PE is applied by padding method. AVCOSOFT PE is added to the finishing bath after the resin, but before the catalyst has been added. Generally a concentration of 20-40 gr/l,. depending on the pick-up, will be sufficient.
FINISHING RECIPES:
-
Cotton fabrics: (crease resistant finish)
AVCOREZ LFR 60 -120gr/l
Magnezium chloride 9 – 18gr/l
AVCOSOFT PE 20 – 30gr/l
-
Rayon filament: (crease resistant finish)
AVCOREZ LFR 100 – 200gr/l
Magnezium chloride 15 – 30gr/l
AVCOSOFT PE 30 – 40gr/l
-
Poly-Cotton Fabric: (to lower pilling)
AVCOREZ LFR 60 – 90 gr/l
Magnezium chloride 9 – 15gr/l
AVCO-ELASTOGUM MEC 10 – 20 gr/l
AVCOSOFT PE 20 – 30gr/l
-
Cotton Knits: (to improve dimensional stability)
AVCOREZ LFR 40 – 60gr/l
Magnezium chloride 6 – 9gr/l
AVCO-ELASTOGUM 100 10 – 20 gr/l
AVCOSOFT PE20 -30gr/l
|