AVCO-STABIWET SDC is a combined product for scouring and bleaching processes of cotton and blends in exhaust dyeing equipments.
AVCO-STABIWET SDC contains peroxide stabilizer, extracting additives, wetting, emulsifying, dispersing and scouring agents.
AVCO-STABIWET SDC provides less handling and weighing in the dye-house, and ensures better reproduction.SPECIFICATION:
Appearance |
Almost colourless clear liquid. |
Chemical nature |
Combination of anionic and nonionic surfactants with organo- metal complexes and complexing agents. |
Compatibility |
- Compatible with all chemicals encountered in peroxide bleaching.
- Product is not compatible with cationic products.
|
Ionicity |
Nonionic / anionic |
pH (10% sol.) |
5 ± 0.5 |
Solubility |
Miscible with water at any ratio |
Storage |
Freezes at O°C, fully usable after thawing. Do not store in direct sun and near heat sources. When properly stored, storage stability is at least 12 monthes. |
PROPERTIES & USES:
- Balanced mixture of stabilizers, complexing/dispersing agents and surfactants
with a synergistic effect.
- Suitable for all types of natural and synthetic fibres.
- Highly effective under all normal bleaching conditions, and will ensure maximum
bleaching efficiency with good absorbency.
- Excellent cleaning and scouring properties.
- The surfactant part has a powerful emulsifying and cleaning properties.
- The product does not contain any silicate compounds, and there are not any risks
of precipitation during use on the fabrics and on machine walls.
- The product is liquid, and can be metered easily to the bleaching machines.
APPLICATION:
A.Typical procedures for half bleach of cotton fabrics:
-
Jet (L.R. 1:6 – 1:10)
AVCO-STABIWET SDC 1.5 – 2.0 g/l
caustic soda (50%) 2.0 – 2.5 cc/l
H2O2 (50%) 3.0 – 4.0 cc/l
Treat at 90-95°C for 30-45 min
-
Winch (L.R. – 1:20)
AVCO-STABIWET SDC 1.5 – 2.0 g/l
caustic soda (50%)1.5 – 2.0 cc/l
H2O2 (50%) 2.0 – 3.0 cc/l
Treat at 90-95°C for 45-60 min.
-
Jig (L.R. 1:3 – 1:5)
AVCO-STABIWET SDC 2.0 – 3.0 g/l
caustic soda (50%) 2.5 – 3.5 cc/l
H2O2 (50%) 3.0 – 6.0 cc/l
Treat at 90-95°C for 1-1.5 hrs
B.Typical procedures for full bleach of cotton fabrics
-
Full bleach of cotton knits (Jet, L.R. 1:6 – 1:10)
AVCO-STABIWET SDC 2.0 – 3.0 g/l
Caustic Soda (50%) 2.5 – 3.0 cc/l
H2O2 (50%) 6.0 – 8.0 cc/l
AVCOLUX CBA-100 0.8 – 1.0 %
Treat for 45-60 min at 90-95°C
-
One bath two steps demineralization and full bleaching of cotton knits (Jet L:R 1:6-1:10)
Add 2-3 g/l STABIWET SDC.
Load fabric and treat for 20-30 min at 70-80°C.
After demineralization, to the same liquor, without dropping bath add bleaching auxiliaries and peroxide according to the following recipe:
Caustic soda (50%) 2.0 – 3.0cc/l
H2O2 (50%) 6.0 – 8.0cc/l
AVCOLUX CBA-100 0.6 – 0.8 %
Treat for 45 min, at 90-95°C.
C.Typical procedures for washing and scouring processes.
-
Scouring of knits made from cellulosic fibres and blends with synthetics.
AVCO-STABIWET SDC1.5 – 3.0g/l
Soda ash 2.0 – 5.0g/l
Treat as 80-90°C for 20-30 minutes.
-
Scouring of socks and ready made garments
AVCO-STABIWET SDC2.0 -3.0g/l
Soda Ash 2.0 -5.0g/l
Treat at 60-80°C for 15-20 minutes.
-
Scouring of synthetic yarns and fabrics.
AVCO-STABIWET SCD.5 -2.0g/l
Treat at 60-70°C, for 20-30 minutes.
|