TEXTILE SMOOTHING AGENT AND SEWABILITY IMPROVER |
|||||||||||||||
AVCO-LUB PEK is a lubricant and softener which can be applied to all kinds of textiles, when there is a need to increase their surface smoothness, and to lower fibre/metal and fibre/fibre friction. When applied to textile knits the product is improving very much the sewability of the treated fabrics. Highly recommended as a raising softener for finishing brushed or napped fabrics. AVCO-LUB PEK is used in resin finishing recipes inorder to lower the losses in abrasion and tear strength as may occur in such processes. SPECIFICATIONS:
PROPERTIES & USES: 1. Reduces fibre/metal and fibre/fibre friction nearly 50% compared to untreated material. 2. The product is non-yellowing and thermostable. 3. Improves the tear resistance and the extension. 4. Does not affect dyeing fastness. 5. Improve the sewability of treated fabrics. 6. Highly recommended as a raising, napping and brushing additive. 7. Lowers the decrease of fabric tensile strength when applied together with l resins. 8. Uniform distribution of the product through the cross-section of the textile fibres. 9. Recommended for application by padding process with or without other softeners. 10. Can be applied in yarn dyeing machine together with cationic softeners. APPLICATION: Application by padding procedures: 1. Cotton fabrics (crease resistant finish): AVCO-REZ ECO PLUS 50 – 90 g/l AVCO-LUB PEK 20 – 40 g/l 2. Rayon filament (crease resistant finish): AVCO-REZ ECO PLUS 80 – 200 g/l AVCO-LUB PEK 30 – 40 g/l 3. Poly-cotton fabric (to lower pilling): AVCO-REZ ECO PLUS 50 – 90 g/l AVCO-ELASTOGUM 100 10 – 20 g/l AVCO-LUB PEK 20 – 30 g/l 4. Cotton knits (to improve handle and sewability): AVCO-ELASTOGUM 100 10 – 20 g/l AVCO-LUB PEK 20 – 30 g/l Application by exhaust procedures: 1. Cotton and polyester cotton knits (to improve handle and sewability): AVCO-SUPERSOFT KPS 2 – 4% AVCO-LUB PEK 0.5 – 2% Adjust the pH to 5.0 – 5.5 with acetic acid. Treat at 40°C for 20 minutes. Hydroexract and dry. 2. Cotton yarns (to improve sewability): AVCO-BIOSOFT BS 2 – 3% AVCO-LUB PEK 1 – 2% Adjust the pH to 5.0 – 5.5 with acetic acid. Treat at 40°C for 20 minutes Hydroextract and dry.
|