AVCOPRINT ESO is an high viscosity, easy soluble alginate based thickener, used for printing of reactive dyestuffs on cellulose, rayon and wool fabrics. The thickener has fast swelling properties.
SPECIFICATION:
Appearance |
Grained, light beige powder. |
Chemical nature |
Highly purified sodium alginate. |
Compatibility |
- Can be used together with all chemicals and dyestuffs encountered in reactive printing.
- Is not compatible with multi-velent metal ions, and strong acids and alkalis.
|
Ionicity |
Anionic |
pH (1% sol.) |
7.5 ± 1 |
Storage |
Stable for at least 12 months if stored in cool and dry place, in closed packages. |
PROPERTIES & USES:
- Produces viscous, long flow printing pastes with low shear sensitivity, and low
sensitivity to electrolytes used in reactive printing.
- Preparation of stock thickening does not require long swelling time. High speed
mixing for 20-40 minutes is enough.
- Produces brilliant prints with sharp definition and high color yield.
- Very easily removable from printed fabric in a normal washing-off process.
- Suitable for printing reactives on cotton, rayon and wool fabrics and for
printing disperse dyes.
- Can be used for all-aqueous and semi-emulsion printing pastes.
- Suitable for dry curing at elevated temperatures (150-160°C). The ease of removal of AVCOPRINT ESO is not affected
APPLICATION:
-
Preparation of stock paste:
Water 945
AVCO-POLYQUEST KAL 5
AVCOPRINT ESO 50
1000
Add AVCO-POLYQUEST KAL to the water. Start high-speed mixing and sprinkle in AVCOPRINT ESO .Mix for 10-20 minutes, and continue with slow agitation for another 10 minutes (swelling time). Change back to high-speed mixing for another 10 minutes until paste is homogeneous. It is possible to add the thickener with high-speed mixing, the pre-mix is stored over night for swelling and remixed again for final dissolving with an high speed mixer.
-
Preparation of semi-emulsion stock paste:
Water adjust to 1000
AVCO-POLYQUEST KAL 1 – 2
AVCOPRINT ESO (5%) 500 -200
AVCOPAL REP 5 – 15
White spirit 150 -400
1000
Prepare aqueous thickening of AVCOPRINT ESO as in (1).
Add AVCOPAL REP.
The final step is adding white-spirit in small portions during high-speed mixing.
-
Preparation of printing paste:
To the stock paste add all ingredients and dyestuffs as recommended by the dyestuff manufacturer. Following is an example of printing paste suitable for printing “MCT” and “VS” dyestuffs.
Stock paste X
Water Y
AVCOSON LL 15 – 30
Urea 100 – 200
Sodium-bicarbonate25
1000
Mix with an high-speed mixer until paste is homogeneous.
-
To the printing paste add the desired amount of dyestuff and mix well until fully dissolved.Printing paste can be stored for long storage times (2-4 weeks) if a suitable preserving agent is added (2-4 g/kg AVCOGARD PR), and depends on type of dyestuffs used.
|