AVCO-PRINTOSIL EM is a silicon softener and plasticizer used for softening binder films in textile pigment printing and dyeing processes.The product does not contain any volatile additives and is not air-polluting at all.
SPECIFICATION:
Appearance |
Milky white emulsion. |
Chemical nature |
Silicone polymer emulsified in water |
Compatibility |
Stable to all chemicals normally used in textile pigment printing and dyeing. |
Ionicity |
Nonionic |
pH (10% sol.) |
7 ± 1 |
Solubility |
Can be mixed with water at any ratio. |
Storage |
Sensitive to frost. When properly stored, shelf life is 12 months at least. |
PROPERTIES & USES:
- Excellent softening effect on all types of binders.
- AVCO-PRINTOSIL EM is chemically inert, and can be combined with all types of chemicals
used in pigment printing and dyeing.
- AVCO-PRINTOSIL EM increases the dry rubbing fastness of pigment prints and pigment
dyed fabrics, without impairing the wet fastness, if used in the proper amounts.
- AVCO-PRINTOSIL EM improves very much the smoothness and the flexibility of the binder
films, even when incorporating high amounts of inorganic pigments such as Titanium-
Oxides, silicates and carbonates.
- AVCO-PRINTOSIL EM increases the brightness of pigment prints and pigment dyed fabrics.
- AVCO-PRINTOSIL EM is suitable as a nonionic softener for all types of textiles. It
improves hand, smoothness and sew-ability of treated fabrics.
APPLICATION:
-
Printing
AVCO-PRINTOSIL EM is added to the printing paste after incorporation of the thickener. Use an high speed homogenizer type mixer.
Usage:
-
Pigment dyeing
To the pigment dyeing recipe add 10-30 g/l of AVCO-PRINTOSIL EM.
-
Finishing
To improve sewability and lubricity add 10-40 g/l of AVCO-PRINTOSIL EM to the finishing bath.
|