AVCOSOFT NE is a cationic softener used for softening Acrylic fibres, yarns and fabrics.
AVCOSOFT NE imparts a very soft, full, wooly handle which is desired by users of Acrylic yarns and knits.
SPECIFICATION:
Appearance |
Creamy, slightly viscous liquid. |
Chemical nature |
Fatty- polyamine condensation product. |
Compatibility |
- Can be applied with nonionics and cationics product.
- Stable to hard water.
|
Ionicity |
Cationic |
pH (10% sol.) |
5 ± 0.5 |
Solubility |
Can be mixed in water at any proportion |
Storage |
Freezes at O° C, fully useable after thawing and stirring. Shelf life is at least 12 months. |
PROPERTIES & USES:
- Softener for all synthetic fibers especially for Acrylics.
- Good resistance to repeated washing.
- No adverse effects on rub or light fastness.
- Good anti-static properties.
- Imparts a soft, full hand. Very good results have been received with high-bulk Acrylic
yarns and garments.
- AVCOSOFT NE improves spinning, winding and knitting of Acrylics.
- Can be applied as a top finish or in the dye bath.
APPLICATION:
AVCOSOFT NE can be applied as a dye-bath softener for Acrylics, or as a top softening agent by exhaustion and padding methods.
Exhaustion process:
-
After dyeing, add to a fresh bath, 1-3% o.w.g. of AVCOSOFT NE. Adjusted pH with Acetic Acid to 5-6.
Treat for 15-20 minutes at 40°C, hydroextract and dry.
-
After dyeing, when bath is cooled down, add to the dyeing bath 1-3% AVCOSOFT NE. exhaustion is done while cooling (only for Acrylics).
-
Application in the dye-bath (for Acrylics). Add to dye-bath 1-3% o.w.g. of AVCOSOFT NE and continue dyeing in the normal procedure (in this process the softener acts as a low retarding agent).
Padding process:
Apply 10-40 gr/l AVCOSOFT NE, depends on the fabric pick-up.
General recommendation for different types of acrylics:
-
Loose material (stock dyeing) – Use 1-3% (gives also better spinning properties).
-
Yarn in hangs form -Use 2-4% (for very soft handle)
-
Yarn in cones or muffs -Use 1-3% (for easily rewinding)
-
Woven or knitted material -Use 1-2%
|